Clipper Cordova 48
The Clipper Cordova 48 is a semi displacement, medium range explorer, cruiser which is complemented by elegant lines and a gracious interiors.
Launched in 2012 and powered with twin 380 hp Yanmar diesels (472hrs) this vessel cruises at a very economical 10 - 14knts with a max closer to 20knt. The 48 Cordova has walk around decks, a large cockpit and expansive fly bridge including a BBQ, davit and tender storage.
Moving forward from the aft deck through double sliding doors is a spacious saloon with the U shape galley located to port and lower helm to starboard. This 48 Cordova has a two double cabin layout (one coverts to two singles) with the master cabin and ensuite forward plus a second shared head and shower.
This vessel has a full service history and is presented in very good condition and can be viewed on our Westhhaven On Water Sales Arena.
Contact Craig Torckler directly on 027 472 9729 to enquire about this boat over the Christmas period.
| Builder | : Clipper Motor Yachts Ltd |
|---|---|
| Hull Construction Material | : GRP |
| Hull Type | : Semi Displacement Mono hull |
| Deck Construction Material | : GRP |
| Length (m) | : 15.57 |
| Beam/Width (m) | : 4.51 |
| Draft (m) | : 1.37 |
| Number of Helms | : 2 |
| Displacement | : 18600 |
| Colour | : Off-White |
| Engine Notes | : Engine: Yanmar 6LY3-UTP / 2 x 380hp Transmission: Yanmar KMH61A Fly Bridge & Lower helm stations Electronic engine management gauges Electronic Throttles Bow & Stern thrusters Shaft drive with PSS shaft seals, new bellows Sept 2019 Engines, Transmission & Gen-set full service Sept 2019 Electric oil change system fitted Assorted engine spares |
| Engine Hours | : 472 approx |
| Engine Room | : This vessel has a large engine room accessed through the saloon sole. There is easy access for servicing to all machinery, tankage & systems. All tankage is fitted with electrical gauges plus sight glasses, the engine fuel supply has dual Racor filters supplying both engines. The engine room has a Seafire fire suppression system fitted. Fuel 2470lt / Water 1100lt |
| Generator | : Cummins Onan 11KW / 166hrs approx |
| Number of Batteries | : All batteries new 2018 |
| Number of Fuel Tanks | : 2 |
| Fuel Tank Capacity (L) | : 2470l |
| Propeller | : Bronze 4 blade |
| Steering System | : Hydraulic 2 station |
| Bow Thruster | : Vetus |
| Stern Thruster | : Vetus |
| Accomodation Notes | : This vessel has 2 double cabins, the master cabin (fwd) has an ensuite with shower, vanity & head. The guest double cabin (port) also converts to 2 singles beds, a communal shower, vanity & head is located to starboard. The starboard saloon settee also pulls out to make a double berth. |
| Number of Berths | : 6 + |
| Number of Showers | : 2 showers below deck and 1 in the cockpit. |
| Toilet Type | : 2 x Tecma electric |
| Air Conditioning | : Eberspacher diesel heater |
| Number of TVs | : Saloon TV with KVH Sat-dome |
| Holding Tank (L) | : Yes |
| Galley Notes | : This vessel has a large U shaped galley located forward to port, with a 230v, 4 hob Smeg cook-top, Smeg combination convection oven, Isotherm SS front Fridge & Freezer. The galley comes equipped with 230v jug & toaster. There is plenty of cupboard storage over head & under the galley bench. An ice maker / fridge is located on the aft deck with a drinks fridge in the bridge. A large Sovereign BBQ is located on the aft deck with a 230v electric BBQ on the bridge deck. |
| Entertainment and Appliances Notes | : Fusion MS-AV600 stereo with Blue tooth, Saloon TV with Sat-dome |
| Anchor / Winch | : Muir Cheetah horizontal windlass with chain gypsy & rope capstan, 10mm anchor chain with a 40kg Rocna |
| Bilge Pump | : 4 electric bilges pumps + 1 manual pump |
| Deck Gear | : Large SS deck cleats, 6 x fenders, 1 x boat hook, 2 landing platform staples with bait board, assorted ropes, folding table, deck chairs. |
| Electrics | : Bennett Trim tabs with display Magnum 3KW inverter Pro-sport 20 plus triple bank battery charger Muir Anchor winch controller |
| Electronics Navigation | : Lower Helm: 2 x 12" Furuno Navnet 3D MFC Radar, Plotter, Sounder Furuno Nav Pilot, Furuno FI-50 Rudder angle Flybridge Helm: 1 x Furuno Navnet 3D MFC Radar, Plotter, Sounder |
| Dinghy | : RIB tender with a 15HP Parson outboard, this is located on the flybridge aft deck, with a 250kg electric davit. Tender cover. |
| Safety Gear | : EPIRB 4 life jackets Seafire engine fire suppression system Fire extinguisher 6 flares First aid kit Horn Tool box Tide clock |
| Covers | : Hard top with new clears & covers on the bridge |
| Radio | : VHF radio to bridge & lower helm |
| Remarks | : Clipper Motor Yachts are built in China under Australia ownership and management, all Clipper boats are constructed to a very high standard and have a strong following worldwide. This vessel is very well equipped with a good inventory of quality electronics, electric systems, it has a full mechanical service history & is presented to the market in very good condition ready to head to sea. This vessel was recently relocated from Picton to Auckland, at which time the vessel encountered sea conditions from most directions with winds of up to 30knts, the passage took 48 hrs. This vessel is a very comfortable, economical large volume coastal cruiser with long range capability. |
| Vessel Name | : Sasco |
| Anti-foul | : New antifoul, Prop speed & anodes Sept 2019 |
Flagship Marine
Your vision is our business and Flagship Marine wants to turn your dreams into a reality.